Waterproof CE Approved SMD5050 12V Warm White LED Strip
|FOB Unit Price:||US $1.98 US $1.96|
|Purchase Qty. (Meters)||FOB Unit Price|
|Production Capacity:||1000 Meters/Day|
|Payment Terms:||T/T, Western Union, Paypal, Money Gram|
- Model NO.: LM5050-WU60-12V
- Power: 14.4W/M
- Voltage: 12V
- Light Source: 5050 SMD
- PCB Width: 10mm
- LED Quantity: 60PCS LEDs/M, 300LEDs/Reel
- CRI: 80
- Transport Package: 5 Meters/Roll with Static-Resistant Bag
- Origin: Zhongshan, Guangdong, China
- Certification: VDE, FCC, CCC, UL, RoHS, CE
- Emitting Color: White
- IP Rating: IP68
- Beam Angle: 120 Degree
- Available Colors: Red, Yellow, Blue, Green, White, Warm White
- Warranty: 2 Years
- Trademark: Leomay
- Specification: 12 CE, ROHS Certified
- HS Code: 9405409000
1 Waterproof flexible SMD LED strip (Gel drop on the top type,Silicone tube series,or Sealed silicone tube with glue inside)
2 Light source:5050 SMD
3 5meter per reel
4 LED quantity: 60pcs LEDs/m, 300LEDs/reel
5 PCB width: 10mm
6 Voltage: 12V DC
7 Power: 14.4W/m,72W/reel
8 Available colors: red, yellow, blue, green, white, warm white
1 Wide applicability,easy to install and maintain
2 Extremely luminous, with wide viewing angle
3 PC base board,unique waterproof technique
4 Energy saving and environmental conservation, long lifespan
5 Operating low voltage (12V DC) for human safety
6 Various colors are available
- The strip itself and all its components may not be mechanically stressed.
- Assembly must not damage or destroy conducting paths on the circuit board.
- Installation of LED ribbon (with power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations.
- Correct electrical polarity needs to be observed. Wrong polarity may destroy the strip.
- Parallel connection is highly recommended as safe electrical operation mode.
- Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload and damage the strip.
- Please ensure that the power supply is of adapters power to operate the total load.
- When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical isolation points between strip and the mounting surface.
- Pay attention to standard ESD precautions when installing the strip.
- Damaged by corrosion will not be honored as a materials defect claim. It is the user's responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements.
|Model||LED QTY||Volt||Power||Lumen/m||CRI||PCB Width||IP Rate|