12w/m SMD 4014 Series 8400lm/roll LED Flexible Strip
Leomay products mainly cover Led Rope Light, SMD Led strip, Led Flood Light,Led Down Light,Led Tube, Led Spotlights, Led Guardrail Lamp, Led Wall Washier, Led Underground Light, Led Underwater Light, Led Modules, Led Outline Lamp, Led Light Cup, Led Bulbs, Led String Lights, Led Screen, Led Curtain Light etc.
1 5 meters roll, every 60 meters lamp, the theoretical power per meter 12W ,Power rating:60W/5M , angle light 120 degrees.
2 24-26lm of each light bead can be customized according to needed.
3 curved, soft, soft and compact, back with 3M double-sided adhesive can be installed in the concave convex surface, easy to install.
4 each 5 or 10 cm ,three or six beads can be used as a unit of shear, cut does not affect other parts. 5 meters in length can be adjusted according to production requirements
5 low voltage 12V, 24V safe DC voltage drive, people and animals can be directly contact, safe and reliable.
low power consumption, low fever, no glare, impact resistance, energy saving and environmental protection.
6 can be customized to glue dust (IP65), (IP66), silicone casing waterproof glue waterproof (IP68);
7 LED Life time: Mean time between failure(MTBF):50-100K hours
- The strip itself and all its components may not be mechanically stressed.
- Assembly must not damage or destroy conducting paths on the circuit board.
- Installation of LED ribbon (with power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations.
- Correct electrical polarity needs to be observed. Wrong polarity may destroy the strip.
- Parallel connection is highly recommended as safe electrical operation mode.
- Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload and damage the strip.
- Please ensure that the power supply is of adapters power to operate the total load.
- When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical isolation points between strip
and the mounting surface.
- Pay attention to standard ESD precautions when installing the strip Damaged by corrosion will not be honored as a materials defect claim. It is the user's responsibility to provide suitable protection against
corrosive agents such as moisture and condensation and other harmful elements